Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Door trim panel

How do you remove the front door panel (driver's side) of a Peugeot 206? This video explains the procedure: use a plastic lever to remove the door handle trim and the mirror cover, then (disconnect the battery terminals located in the engine bay) use a screwdriver to unscrew the screws located in the handle on the door panel, unscrew the screws around the perimeter of the door panel. Use the plastic lever to detach the clips on the panel and remove the panel from the door with your hands. Reassemble everything in reverse order.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before you begin, open the front door of your Peugeot 206. Start by uncliping and removing the internal cover located near the rearview mirror, then …
Replacing the Door Panel on a Peugeot 206
Replacing the Door Panel on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Replace the door panel on a Peugeot 206 if it is irreparably damaged and cannot be replaced. Here’s how to do it. Using a screwdriver, unscrew the sc…
Removing the Door Panel on a 206
Removing the Door Panel on a 206
Peugeot 206 (1998-2012 / MK 1) How to remove the door panel to take out the speaker on a Peugeot 206? Here’s how to remove the cover panel. Remove the plastic at the corner of the …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos