Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the air filter on a Peugeot 308 MK1

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

In this video we can see how to change the air filter on a Peugeot 308 MK1: we will have to unscrew the two fastening devices of the brake fluid tank, which must be removed. Then we will have to unscrew the fastening ring from the air filter inlet tube.

On the air filter cover there are three screws that must be removed; they are in a rather awkward position. Disconnect the air intake hose, and then remove the filter cover.

Now we can remove the filter. Clean the housing well from dust and residue, but first cover the ducts and throttle valve with a cloth, so that we are sure that dirt does not contaminate them.

Insert the new filter into the clean compartment, paying attention to the mounting direction, then put the cover back on. Reconnect the intake hose and put the brake fluid tank back in place.


Posted on 8 July 2025 by ScegliAuto


Related tutorials

Replacing Cabin Air Filter on Peugeot 308 1.6 HDI
Replacing Cabin Air Filter on Peugeot 308 1.6 HDI
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to change the cabin air filter on the Peugeot 308. The filter is located under the bonnet: open it, and at…
How to Change the Air Filter on a Peugeot 308
How to Change the Air Filter on a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Here’s how to remove the engine air filter on a Peugeot 308. Open the car door, pull up the engine compartment release lever located at the bottom le…
How to replace the air filter of the Peugeot 308
How to replace the air filter of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The following video tutorial shows us the steps to replace the air filter of the Peugeot 308 model mk2 on our own. To replace the filter, we need to …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos