Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the headlight bulb of the Peugeot 3008?

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Headlight bulb

One of the bulbs in the front headlight is burnt out, so it needs to be replaced, or you may be considering replacing them with LED bulbs. You can either have someone do the job for you or try to do it yourself. It is possible, it only takes a little time and a few tools, as shown in the video available here. The video even shows how to disassemble the entire headlight, but we only need to see how to remove and replace the bulb: Behind the headlight assembly, there are rubber protective caps to be removed, under which we find the bulb holders to be removed, and finally removing the burnt out bulb to replace it.

Posted on 16 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 3008 (2009-2016 / T84, MK 1) In this new guide of ours, we will discover how to correctly replace the rear headlight bulb of your Peugeot 3008. First of all, you need to purchase…
Peugeot 3008 (2016-2023 / MK 2, P84) In this guide, you will find instructions on how to remove and replace the dipped beam bulb of the front headlight on a Peugeot 3008. First, open the…
Peugeot 3008 (2009-2016 / T84, MK 1) In this mini guide for all Peugeot 3008 first generation (2010) owners, you will discover the steps to replace the third brake light. First, ensure y…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos