Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight bulb of the Peugeot 3008

Model: Peugeot 3008 T84, MK 1 - Years 2009-2016
Part: Headlight bulb

The instructions in this guide will show us how to disassemble and replace the headlight bulb of the Peugeot 3008. First, we open the hood of the car and start removing the plastic protection cap of the bulbs; then we disconnect the electrical connector of the light and release the metal clip to remove it, as shown in the video. At this point, we install the new low beam bulb, of the correct type and with the same attachment; we check the functioning of the light and replace, if necessary, the other low beam bulb in the same way.

Posted on 28 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Peugeot 3008
How to replace the front headlight bulb of the Peugeot 3008
Peugeot 3008 (2016-2023 / MK 2, P84) The steps to replace the front headlight bulb of the Peugeot 3008 are: -Open the front hood of the car; -Remove the cap of the headlight dome; -Disco…
How to replace the headlight bulb of the Peugeot 3008
How to replace the headlight bulb of the Peugeot 3008
Peugeot 3008 (2009-2016 / T84, MK 1) Replacing the front headlight bulb of your first series Peugeot 3008 is really very simple and thanks to the procedure described in the following gui…
How to replace the front headlight bulb of the 2017 Peugeot 3008.
How to replace the front headlight bulb of the 2017 Peugeot 3008.
Peugeot 3008 (2016-2023 / MK 2, P84) The steps to follow to replace the front headlight bulb of the Peugeot 3008 are: - open the front hood; - remove the cap from the headlight dome; - d…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos