Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door Panel

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Door trim panel

First, remove the cover inside the handle to access the screw underneath: then unscrew this screw and those along the edge of the panel; detach the handle cover and unscrew the other two screws present.
Disconnect the window switch and the trim around the internal opening lever.
At this point, using a plastic lever or a medium-sized flat screwdriver, unclip the pressure clips along the edge of the panel and pull it upwards to remove it from the window seal; disconnect the wiring connected to it and remove the panel.

Updated on 3 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel on the Peugeot 308 I
How to Remove the Front Door Panel on the Peugeot 308 I
Peugeot 308 (2007-2014 / T7, MK 1) To remove the front door panel on the Peugeot 308 I, the fastening points are clearly visible; in the glove compartment, you will find a round plasti…
Removing the Door Panel of a Peugeot 308
Removing the Door Panel of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) Today, we will see in this video tutorial how to remove the front door panel of the Peugeot 308, following the instructions below. First, open the fr…
How to Remove the Door Panel of a Peugeot 308
How to Remove the Door Panel of a Peugeot 308
Peugeot 308 (2007-2014 / T7, MK 1) This guide shows how to remove the door panel of a Peugeot 308 (passenger side). First, use a trim tool to pry around the internal door handle. Next,…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos