Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Window Switch Panel on a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Window switch

Here are brief instructions for removing and replacing the window switch panel on a Peugeot 308. First, open the front door and start prying on the side of the window switch panel to detach and remove it from the door panel. Then disconnect the electrical connector located underneath, as shown in the video. At this point, replace the individual button if necessary or the entire window switch panel; reconnect the electrical connection and test the operation of all window buttons!

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Window Regulator on a Peugeot 308?
How to Reset the Window Regulator on a Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) You can reset the window regulator on a Peugeot 308 by first turning on the instrument cluster after inserting the ignition key into the correspondin…
Removing the Door Panel on a Peugeot 308 SW
Removing the Door Panel on a Peugeot 308 SW
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to remove the rear door panel of a Peugeot 308 SW. First, open the door and use a T20 Torx spanner to remo…
How do you disassemble the rearview mirror in the Peugeot 308?
How do you disassemble the rearview mirror in the Peugeot 308?
Peugeot 308 (2013-2021 / T9, MK 2) We observe how to disassemble the external rearview mirror in the Peugeot 308 in this helpful video tutorial. The reasons for carrying out this inter…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos