Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years 2007-2014
Part: Door trim panel

Today, we will look at the instructions for removing and replacing the front door panel of a Peugeot 308. First, open the front door and start by removing the plastic cover of the grab handle; then remove the plastic cover of the handle and lever the switch panel to detach it from the panel, disconnecting the electrical connector found underneath, as shown in the video. At this point, lever the sides of the panel to detach and remove it, disconnecting the handle cable; then refit the door panel!

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
How to remove the door panel of a Peugeot 308?
How to remove the door panel of a Peugeot 308?
Peugeot 308 (2007-2014 / T7, MK 1) To remove the door panel of your Peugeot 308, start by taking a trim removal tool or a flat screwdriver wrapped in a cloth to avoid scratches, and un…
Disassembly of the rear door panel of the Peugeot 308
Disassembly of the rear door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…

Where is the Spare Wheel in the Peugeot 5008?

This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground.

Watch the video!


by ScegliAuto

More videos