Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of a Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Door trim panel

See other generations:
Video tutorial

Today, we will see in this video tutorial how to remove the front door panel of the Peugeot 308, following the instructions below. First, open the front door and start by removing the plastic cover found on the panel; then unscrew the screws located underneath, subsequently levering on the sides to detach and remove the door panel, as illustrated in the video.

At this point, disconnect the electrical connector of the switch panel and the handle cable; for reassembly, simply apply the reverse procedure!


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Door Panel of a Peugeot 308 SW
How to Remove the Rear Door Panel of a Peugeot 308 SW
Peugeot 308 (2013-2021 / T9, MK 2) Before starting, open the rear door of your Peugeot 308 SW. Begin by prying out and removing the insert from the door panel's pillar using a thin but…
Removing the Door Panel on a Peugeot 308 SW
Removing the Door Panel on a Peugeot 308 SW
Peugeot 308 (2007-2014 / T7, MK 1) In this video tutorial, you will learn how to remove the rear door panel of a Peugeot 308 SW. First, open the door and use a T20 Torx spanner to remo…
Disassembly of the rear door panel of the Peugeot 308
Disassembly of the rear door panel of the Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this short guide, we will see the instructions that will allow us to disassemble the rear door panel of the Peugeot 308. First, we open the rear d…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos