Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil warning light on the Peugeot 3008

Model: Peugeot 3008 P84, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Service warning light

See other generations:
Video tutorial

On Peugeot 3008 vehicles, the steps to reset the oil change light are simple and quick to perform independently. To start the reset of the light, we must turn on the instrument panel and immediately press the button located on the right side of the instrument panel.

Keep the button pressed until the countdown is complete. Then release the button, wait a few seconds, and restart the instrument panel to complete the reset operation.

If the light is not reset when the vehicle is turned on, it will be necessary to go to the workshop to perform a diagnosis using an OBD socket and diagnostic computer.


Posted on 20 September 2025 by ScegliAuto


Related tutorials

Reset of the AdBlue warning light of the Peugeot 3008
Reset of the AdBlue warning light of the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) In this guide, we will see the instructions that will allow us to reset the AdBlue warning light on the Peugeot 3008. To reset the AdBlue refill warn…
What does the AdBlue warning light on the Peugeot 3008 indicate?
What does the AdBlue warning light on the Peugeot 3008 indicate?
Peugeot 3008 (2016-2023 / P84, MK 2) The AdBlue warning light comes on when it is necessary to top up the liquid inside the tank. Since this warning light only concerns diesel engines, t…
How to reset the engine oil warning light on the Peugeot 3008
How to reset the engine oil warning light on the Peugeot 3008
Peugeot 3008 (2016-2023 / P84, MK 2) Today, we will go through the steps to reset the service light for the engine oil change on the Peugeot 3008. First, get inside the vehicle and press…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos