|
Do it yourself
| |||
| ||||
How to change the front brake pads of the Peugeot 207
Model: Peugeot 207
MK 1
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Video tutorial
Let's see how to change the front brake pads of the Peugeot 207: open the hood and the brake fluid reservoir (this will facilitate the retraction of the caliper pistons). With the car still on the ground, loosen the nuts on the front wheels and then lift the car and place it on two jack stands, then remove the wheels. Turn the brake disc to have better access to the caliper; lever with a flat screwdriver between the old pad and the disc, to retract the caliper piston; this creates the necessary space for the new, thicker pads. Remove the lower pin of the caliper, then lift it and remove the old pad. Clean the seat with a wire brush, apply a thin layer of copper grease on the back of the new pad (not on the friction surface, be careful!), then put the pad back in place. Reposition the caliper and tighten the lower pin. Repeat everything on the other side, mount the wheels, close the brake fluid cap, lower the car and press the brake pedal several times, in order to bring the pads closer to the disc and restore pressure in the system.
Posted on 20 October 2025 by ScegliAuto
Related tutorials
Peugeot 207
(2006-2015 /
MK 1)
In this video tutorial, you will learn how to replace the front brake pads on a Peugeot 207. First, lift the vehicle and remove the front wheel by un…
Peugeot 207
(2006-2015 /
MK 1)
Today, you will see step-by-step instructions on how to remove and replace the front brake discs on a Peugeot 207. First, lift the vehicle and start …
Peugeot 207
(2006-2015 /
MK 1)
First, open the bonnet and remove the brake fluid cap. Next, loosen the bolts on the front wheels, then lift the vehicle and secure it on axle stands…
Other guides you may be interested in
|
How to Activate Cruise Control on the Peugeot 3008
Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.044
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
