Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads on a Peugeot 207

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Checks and maintenance

First, open the bonnet and remove the brake fluid cap. Next, loosen the bolts on the front wheels, then lift the vehicle and secure it on axle stands to ensure it doesn't fall. Remove the wheels and use a wire brush to clean the calipers of dust and dirt. Separate the brake calipers; keep the caliper attached so the hose is not strained. Now, remove the brake pads. Clean the housing thoroughly with the same brush, then spray a bit of WD-40. Now, install the new pads, applying some grease on the tops to prevent squeaking. Clean the caliper by spraying WD-40, refit the bush, and then reinstall the caliper. Apply a bit more WD-40 on the disc. Now, you can remount the wheel and lower the vehicle. Job done.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Pads on Peugeot 207
Replacing Front Brake Pads on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) In this video tutorial, you will learn how to replace the front brake pads on a Peugeot 207. First, lift the vehicle and remove the front wheel by un…
How to Replace Front Brake Discs on Peugeot 207
How to Replace Front Brake Discs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Today, you will see step-by-step instructions on how to remove and replace the front brake discs on a Peugeot 207. First, lift the vehicle and start …
How to Change Front Brake Discs on Peugeot 207
How to Change Front Brake Discs on Peugeot 207
Peugeot 207 (2006-2015 / MK 1) Replacing the brake discs on a Peugeot 207? Let’s look at replacing the front disc. Lift the car on a column lift to the desired height, then remove …

Other guides you may be interested in

    Frequently Asked Questions

    • 207 2006-2015 - Where is the inertia switch on the Peugeot 207? Read answer
    • 207 2006-2015 - Why does the Peugeot 207 give the message "auto-lock active" and does not start? Read answer
    • 207 2006-2015 - Where is the gear oil cap located in a Peugeot 207? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos