Do it yourself
Frequently asked questions about cars and motorcycles

How to activate cruise control on the Peugeot 3008

Model: Peugeot 3008 P64 - Years 2023-2026
Part: Onboard computer

Let's see how to activate the cruise control on the Peugeot 3008: the controls are located under the steering wheel, a small wheel, while the control buttons are on the back of the steering wheel itself. Select the mode by turning the wheel to the lower position for cruise control: In the central position it is deactivated, in the upper position we have activated the speed limiter. To activate the cruise, we must reach a speed exceeding 40 km/h. Press the central button on the wheel selector: in this way the current speed is "captured"; we can adjust it with the +/- buttons, briefly deactivate it with the central button or with the brake (the system deactivates but retains the memory).

Posted on 30 October 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

Peugeot 3008 (2009-2016 / T84, MK 1) Today's steps will show us how to activate the cruise control on the Peugeot 3008, following the instructions below. First, we get on board the car a…
Peugeot 3008 (2016-2023 / MK 2, P84) In this video, learn how to activate the cruise control on the second series Peugeot 3008, as well as on the 2008 and 308. First, get into the vehicl…
Peugeot 3008 (2016-2023 / MK 2, P84) Today we will discover the instructions that will allow us to set the cruise control on the Peugeot 3008, in simple and quick steps. To set the cruis…

Other guides you may be interested in

    Frequently Asked Questions

    • 3008 2016-2023 - What to do when the Peugeot 3008 cruise control does not work? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos