Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the spark plugs on the Peugeot 108

Model: Peugeot 108 MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Spark plugs

Video tutorial

Today we will explain how to independently replace the spark plugs of the Peugeot 108 petrol engine. To replace the spark plugs, open the front hood and lift the four clips that hold the engine cover in place to remove it. Access the three ignition coils that need to be removed to access the spark plugs; disconnect the spark plug power by pulling the connector lever.

Using a socket wrench with a 10mm insert, unscrew the nut located on the coil and gently remove the coil. Use a socket wrench with an extension and a 14mm insert to unlock the spark plug.

After removing the spark plugs, insert the new ones and connect the coil to the connector. Reassemble the engine cover and start the vehicle.


Posted on 14 November 2025 by ScegliAuto


Related tutorials

How do you reset the tire pressure light on the Peugeot 108?
How do you reset the tire pressure light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) It will be possible to reset the tire pressure light of the Peugeot 108 by inflating the tires to the corresponding pressure value: once the inflatio…
How to replace the air filter of the Peugeot 108
How to replace the air filter of the Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To correctly replace the engine air filter of your Peugeot 108, it only takes a few minutes. All you have to do is carefully read the following guide…
How to Program the Key for a Peugeot 108?
How to Program the Key for a Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) To program the key for a Peugeot 108, insert the key into the ignition and turn it to position two, then back to position one; after this, open and c…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Windscreen Without Damaging the Glass

Removing stickers or tags from your car's glass without damaging the windscreen has always been a problem. Especially if we attach it - as we should - at the top of the windscreen, where the "black dots" are, which is the unshielded part of the windscreen designed for this type of device, whether it be a toll tag, GoPro, cameras, or otherwise. We found this product that seems suitable, specifically designed for this purpose, and it also thoroughly removes dirt, grease, oil, and antifreeze salt from plastic surfaces. You can find it on the ATG website or on Amazon.

Watch the video!


by ScegliAuto

More videos