Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : Reset the Peugeot 2008 tire pressure sensor

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Operation: Reset the Peugeot 2008 tire pressure sensor

Have you replaced a tire or does the warning appear on the panel display? Do not worry, you will not have to go to the workshop, we will reset the sensors by ourselves and these errors reported by the machine will disappear. First we inflate the tires to the right pressure, it depends on the load of your car. Then we turn on the ignition and wait for the message "adjust the tire pressure, then" reset. "Now let's move to the touch display of the multimedia system, access the" menu "using the appropriate physical button, select" guide "on the screen at the bottom right. Now "tire initialization" in the upper left corner. When it appears if you have adjusted the pressure press "Yes". Now the adjusted pressure appears on the panel.


Posted on 13 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - Why is the touch screen display not working in a Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - What problems have been encountered on the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What could be a problem with the AdBlue tank in a Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Why doesn't the Start&Stop of the Peugeot 2008 work? Read Answer
    • Peugeot 2008 2019-2026 - What to do when the Peugeot 2008 won't start? Read Answer
    • Peugeot 2008 2019-2026 - How many liters does the Peugeot 2008 AdBlue tank hold? Read Answer
    • Peugeot 2008 2019-2026 - How much AdBlue should be put in a Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Why doesn't the start & stop work on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Why doesn't the Start & Stop work on the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - How to reset the tire warning light on a Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Problems with AdBlue on the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - How much does the urea tank cost in a Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Why is the navigator of the Peugeot 2008 not working? Read Answer
    • Peugeot 2008 2013-2019 - How many liters of engine oil are needed in a Peugeot 2008 1.6 HDI? Read Answer
    • Peugeot 2008 2019-2026 - What to do if the start and stop on the Peugeot 2008 works? Read Answer
    • Peugeot 2008 2019-2026 - What does it mean when the Adblue warning light comes on on the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What problems on Peugeot 2008 with Adblue? Read Answer
    • Peugeot 2008 2019-2026 - Why does the AdBlue warning light come on in a Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - What problems with the Peugeot 2008 anti-pollution system? Read Answer
    • Peugeot 2008 2019-2026 - What problems with the anti-pollution system on the Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos