Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : Cabin air filter replacement

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Cabin air filter
Operation: Cabin air filter replacement

Open the engine hood; on the upper right side (under the windshield) you will find a plastic grille; act on the three fixing tabs and remove the cover. Inside the box there are two rectangular covers (one next to the other) by detaching which you will take out the passenger compartment filter: replace the two old cartridges with the new ones, pay attention to the direction of insertion as indicated in the filter, and close the cap of the two containers. As a last step, reposition the grill in its housing paying attention to the fixing levers (you will hear a click of correct closing). You are done.


Posted on 14 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - Where is the cabin air filter located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the pollen filter located on Peugeot 2008? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos