Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Horn Button on the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Push button

In this guide, you will find the main instructions on how to repair the horn switch and button on the Peugeot 206. First, get in the vehicle and start by removing the steering wheel airbag by pushing on the rear holes; disconnect the electrical connector at the back, as shown in the video. Next, remove the plastic cover to access the horn switch and cable; check the contact's functionality, replacing it if necessary with a new one (or clean it with contact cleaner). Finally, reassemble and reconnect the airbag.

Posted on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Airbag and Horn Button on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) In today's video, you will see how to remove the driver's airbag and, consequently, the horn button on a Peugeot 206 by following these simple instru…
Where to Find the Fuses for the Peugeot 206 Alarm System
Peugeot 206 (1998-2012 / MK 1) This video shows where to find the fuses for the Peugeot 206 alarm system, which should be checked if it suddenly stops working or shows signs of mal…
Where are the fuses located in the Peugeot 206?
Where are the fuses located in the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) All fuses in the Peugeot 206 are contained within the dedicated fuse box installed in the car: this is located inside the cabin, on the lower left si…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos