Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : Replace the headlight bulbs.

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Headlight bulb
Operation: Replace the headlight bulbs.

After putting the car on a plane, we open the hood of the engine compartment using the small lever located at the bottom of the door closure, inside the passenger compartment (as we can see in the images). Now let's remove the water and humidity protection from the headlight whose bulb we want to replace. Once this has been done, we remove the socket that supplies electricity to the bulb that we need to replace. Now we extract the bulb, to be replaced, from its seat after having rotated it in order to disengage it. At this point we can assemble the new bulb and reassemble everything following the same operations seen in the images but proceeding to perform them backwards.


Posted on 18 November 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos