Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The Problem with the Peugeot 5008 Boot Not Opening is Due to Wiring

Model: Peugeot 5008 MK 1 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

If the boot of your Peugeot 5008 won't open, the culprit could be a simple broken wire in the harness connecting the tailgate to the body. This issue is common in many vehicles with this type of body (hatchback), as the wires bend and fray with repeated opening and closing.

To diagnose it, open the internal lining of the tailgate and inspect the wiring harness in the hinge area. Look for any breaks or frayed wires.

In the video, a broken wire was found and temporarily repaired by twisting the two ends together, restoring functionality. The permanent repair involves soldering or joining with a connector, then insulating with heat-shrink tubing.

If you have other electrical issues, check the same wiring harness.


Posted on 4 July 2026 by ScegliAuto


Related tutorials

How do you reset the engine fault warning light in the Peugeot 5008?
How do you reset the engine fault warning light in the Peugeot 5008?
Peugeot 5008 (2017-2024 / MK 2) The engine malfunction indicator light of a car, including a Peugeot 5008, can light up for various reasons, such as injection problems, oxidized spa…
How to Access the Cabin Fuse Box on a Peugeot 5008
How to Access the Cabin Fuse Box on a Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Before you can begin, open the driver's side door of your Peugeot 5008. The cabin fuse box is located on the lower left side of the steering column. …
Where to Find the OBD2 Port in the Peugeot 5008
Where to Find the OBD2 Port in the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) If you want to access the data from the ECU of your first-generation Peugeot 5008, you need to know where the OBD2 port is located to connect a diagn…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos