Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Roof Bars on a Peugeot 5008?

Model: Peugeot 5008 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Roof rack bars

See other generations:
Video tutorial

Adding the ability to increase luggage or package load on a Peugeot 5008, as with any other vehicle, is offered by roof bars, which are to be mounted on the roof of the vehicle. For the vehicle in question, proceed as follows: prepare the bars, i.e., attach the anchoring brackets by screwing them onto the ends, then position them in the designated spaces on the roof's side rails and tighten and secure the pins with a suitable hex key. That’s all, there’s nothing more to do.


Posted on 29 August 2026 by ScegliAuto


Related tutorials

How can the space inside the luggage of the Peugeot 5008 be utilized?
How can the space inside the luggage of the Peugeot 5008 be utilized?
Peugeot 5008 (2017-2024 / MK 2) The trunk of this Peugeot 5008 offers multiple possibilities: without any modifications, it can be organized with boxes, hard bags, or an organizer t…
How to Reset the Service Light on a Peugeot 5008?
How to Reset the Service Light on a Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) This guide shows how to turn off the service light on a Peugeot 5008, also known as Service, DIY without any tools, just using the buttons provided a…
Where to Find the OBD2 Port in the Peugeot 5008
Where to Find the OBD2 Port in the Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) If you want to access the data from the ECU of your first-generation Peugeot 5008, you need to know where the OBD2 port is located to connect a diagn…

How to Replace the External Door Handle on a Renault Master

Today's instructions will show you the procedure for removing and replacing the external door handle on the front door of the Renault Master. First, open the front door and start removing the door panel by unscrewing all the fixing screws; then unscrew the handle screws, pulling it out from the outside as shown in the video. At this point, install the new external handle, as well as the original one, checking its proper operation; finally, reassemble the door panel, following the video until the end!

Watch the video!


by ScegliAuto

More videos