Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change an ABS Sensor on a Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

Video tutorial

To replace an ABS sensor on a Peugeot 206, park the car on a flat surface, engage the handbrake, and safely lift the affected wheel. Remove the wheel and locate the ABS sensor near the hub. Follow the related cable to the connector, freeing it from the supports and clips that hold it in place.

Disconnect the electrical plug, then unscrew the bolt that secures the sensor to the hub carrier. Gently extract the component from its seat; if it is stuck due to dirt or oxidation, move it carefully without damaging the housing.

Clean the mounting area and insert the new sensor, then tighten the bolt. Reposition the wiring in the original supports and reconnect the connector.

Refit the wheel, lower the car, and check that the ABS light turns off after starting or during driving.


Posted on 2 September 2026 by ScegliAuto


Related tutorials

How to Replace the ABS Sensor and Reset the Light on a Peugeot 206
How to Replace the ABS Sensor and Reset the Light on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Next, we will see the steps to remove and replace the ABS sensor and reset the light that appears on the dashboard of the Peugeot 206. First, lift th…
Replacing the External Temperature Sensor on a Peugeot 206
Replacing the External Temperature Sensor on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) How to remove the temperature sensor from a Peugeot 206? Let’s look at removing the sensor from inside the engine bay. Lift the front bonnet of the c…
Removing the Temperature Sensor on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Are you having issues with the temperature sensor? Here’s how to remove the temperature sensor on a Peugeot 206. Lift the front engine bonnet. Discon…

    Frequently Asked Questions

    • 206 1998-2012 - Where is the inertia switch on the Peugeot 206? Read answer
    • 206 1998-2012 - Where is the Peugeot 206 petrol pump relay located? Read answer

How to Reset the Tyre Pressure Light on a Cupra Formentor

In this brief and simple video tutorial, learn how to reset the tyre pressure on a Cupra Formentor. Start by pressing the ignition button to turn on the instrument cluster. Now, use the touchscreen display on the central console to open the car menu. From here, select the driving data option, then the tyre pressure option. Now, click on the "SET" button with the pressure warning symbol and confirm the correct tyre pressure required by the manufacturer to perform the reset.

Watch the video!


by ScegliAuto

More videos