Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Fuses on Peugeot 5008

Model: Peugeot 5008 MK 1 - Years 2009-2016
Part: Fuse box

Need to replace the fuses located in the dedicated box on a Peugeot 5008? Here’s how to proceed. Open the door and enter the vehicle, use a plastic lever to remove the cover in the glove compartment (located on the dashboard next to the steering wheel), then remove the drawer itself. Use pliers to pull out the damaged fuses from the dedicated area. Once this is done, insert the new fuses into their respective slots. Finally, close the fuse inspection box with the cover and reinstall the drawer. Test the correct operation of the vehicle by turning on the instrument panel.

Updated on 14 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Access the Cabin Fuse Box on a Peugeot 5008
How to Access the Cabin Fuse Box on a Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) Before you can begin, open the driver's side door of your Peugeot 5008. The cabin fuse box is located on the lower left side of the steering column. …
Fuse Box Location on Peugeot 5008
Fuse Box Location on Peugeot 5008
Peugeot 5008 (2009-2016 / MK 1) In this guide, discover the location and diagram of the internal and external fuse boxes on a first-generation Peugeot 5008. Get inside the vehicle a…
Where is the Engine Fuse Box Located in a Peugeot 5008?
Where is the Engine Fuse Box Located in a Peugeot 5008?
Peugeot 5008 (2009-2016 / MK 1) If you own a first series Peugeot 5008 and are wondering where the engine fuse box is located, just read the following instructions and follow each s…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos