Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : How to remove a thermostatic valve on Peugeot 307

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Thermostat
Operation: How to remove a thermostatic valve on Peugeot 307

Is the thermostatic valve to be replaced? Let's see how on the Peugeot 307. Unscrew the pins of the thermostat sleeve as shown in the video and (we use a socket wrench with relative bushes) remove the sealing cap of the housing and extract the thermostatic coolant valve. We insert the new piece and close with the cap of the sleeve. We tighten the screws well. Make sure that you have correctly inserted and mounted the valve in the appropriate housing. We test the operation of the vehicle. If that doesn't work, we can disassemble and check if we have connected all the pieces.


Posted on 2 December 2023 by ScegliAuto

    Frequently Asked Questions

    • 307 2001-2009 - Where is the thermostat of a Peugeot 307 located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos