Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pressure Sensor on the Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Checks and maintenance

To replace the fuel pressure sensor on the Peugeot 307, open the bonnet to access the components in the engine bay. At the rear side of the engine block, locate the EGR valve, which must be removed from the exhaust manifold by unscrewing its fixing bolts and disconnecting the appropriate connectors. Once the valve is removed, locate the corresponding sensor below, which can then be extracted and replaced with a new part.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Oil Pressure Sensor on the Peugeot 307 1.4
How to Replace the Oil Pressure Sensor on the Peugeot 307 1.4
Peugeot 307 (2001-2009 / MK 1) In today's video tutorial, you will learn how to remove and replace the engine oil pressure sensor on the Peugeot 307 with a 1.4 engine. First, open …
Removing the Fuel Pump from the Peugeot 307
Removing the Fuel Pump from the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In today's video tutorial, we will see the instructions on how to remove and replace the fuel pump or float from the Peugeot 307. First, access the r…
How to replace the coolant temperature sensor of the Peugeot 307 1.4 HDi
How to replace the coolant temperature sensor of the Peugeot 307 1.4 HDi
Peugeot 307 (2001-2009 / MK 1) Following the instructions provided in this guide, we will see how to disassemble and replace the engine coolant temperature sensor of the Peugeot 30…

Other guides you may be interested in

    Frequently Asked Questions

    • 307 2001-2009 - Where is the oil pressure sensor located on the Peugeot 307? Read answer
    • 307 2001-2009 - How much does it cost to repair the roof of a Peugeot 307 Station Wagon? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos