Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the MAP sensor of the Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Checks and maintenance

In order to replace the MAP sensor of the Peugeot 307, you need to open the hood so that you can access the components located inside the engine compartment: at the rear of the engine block, immediately above the exhaust manifold, you will be able to locate the MAP sensor. This can be removed from its location simply by disconnecting the appropriate connector: once the old sensor has been removed, you can then position the new replacement part. This must be secured and connected, and its operation verified.

Posted on 11 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the coolant temperature sensor of the Peugeot 307 1.4 HDi
How to replace the coolant temperature sensor of the Peugeot 307 1.4 HDi
Peugeot 307 (2001-2009 / MK 1) Following the instructions provided in this guide, we will see how to disassemble and replace the engine coolant temperature sensor of the Peugeot 30…
How to Replace the Oil Pressure Sensor on the Peugeot 307 1.4
How to Replace the Oil Pressure Sensor on the Peugeot 307 1.4
Peugeot 307 (2001-2009 / MK 1) In today's video tutorial, you will learn how to remove and replace the engine oil pressure sensor on the Peugeot 307 with a 1.4 engine. First, open …
How to Replace the Coolant Temperature Sensor on a Peugeot 307
How to Replace the Coolant Temperature Sensor on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the coolant temperature sensor on a Peugeot 307, open the bonnet to access the components inside the engine bay: this will allow you to un…

    Frequently Asked Questions

    • 307 2001-2009 - Where is the oil pressure sensor located on the Peugeot 307? Read answer
    • 307 2001-2009 - How much does it cost to repair the roof of a Peugeot 307 Station Wagon? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos