Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Oil Pressure Sensor on the Peugeot 307 1.4

Model: Peugeot 307 MK 1 - Years 2001-2009

In today's video tutorial, you will learn how to remove and replace the engine oil pressure sensor on the Peugeot 307 with a 1.4 engine. First, open the bonnet and locate the sensor, which is found at the bottom (near the oil filter); then disconnect its electrical connector and use a 22 mm socket to unscrew the sensor, placing a container under the vehicle to catch any oil spills, as illustrated in the video. At this point, replace the sensor with the new one, screwing it in by hand before tightening with a spanner!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 307 (2001-2009 / MK 1) To replace the fuel pressure sensor on the Peugeot 307, open the bonnet to access the components in the engine bay. At the rear side of the engine bl…
Peugeot 307 (2001-2009 / MK 1) Following the instructions provided in this guide, we will see how to disassemble and replace the engine coolant temperature sensor of the Peugeot 30…
Peugeot 307 (2001-2009 / MK 1) This short and simple guide will show us how to disassemble and replace the coolant temperature sensor of the Peugeot 307 1.6 HDi. First, we open the…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos