Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant temperature sensor of the Peugeot 307 1.4 HDi

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Engine coolant temperature sensor

Video tutorial

Following the instructions provided in this guide, we will see how to disassemble and replace the engine coolant temperature sensor of the Peugeot 307 1.4 HDi. First, we open the hood of the car and start by disconnecting the air intake hose; then we disconnect the electrical connector of the temperature sensor located below, then unscrew the sensor to remove it, as shown in the video.

At this point, we install the new temperature sensor, making sure it is properly connected and verifying its correct operation!


Posted on 28 July 2025 by ScegliAuto


Related tutorials

Replacement of the coolant temperature sensor of the Peugeot 307 1.6 HDi.
Replacement of the coolant temperature sensor of the Peugeot 307 1.6 HDi.
Peugeot 307 (2001-2009 / MK 1) This short and simple guide will show us how to disassemble and replace the coolant temperature sensor of the Peugeot 307 1.6 HDi. First, we open the…
How to Replace the Coolant Temperature Sensor on a Peugeot 307
How to Replace the Coolant Temperature Sensor on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the coolant temperature sensor on a Peugeot 307, open the bonnet to access the components inside the engine bay: this will allow you to un…
How to replace the timing belt on the Peugeot 307 1.6 HDI
How to replace the timing belt on the Peugeot 307 1.6 HDI
Peugeot 307 (2001-2009 / MK 1) Below are the instructions for removing and replacing the timing belt on the Peugeot 307 1.6 HDI. First, open the bonnet of the vehicle and begin by …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos