Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Oil and Oil Filter on a Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Oil filter

Video tutorial

How to replace the oil and oil filter on a Peugeot 307? Here’s how to proceed with the replacement: lift the car on a column lift (jack) and undo the bolt of the oil sump, allowing the oil to drain into a container (tighten the bolt after draining).

Lower the car back to the ground, then open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard and lift the front bonnet, securing it. Using a socket, undo the oil filter (remove it) and position a new one, ensuring it fits well around the thread.

Remove the cap on the cylinder head and top up with new oil.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the Peugeot 307
How to Change the Engine Oil and Oil Filter on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) This brief and simple guide outlines the main steps to change the engine oil and oil filter on the Peugeot 307. First, lift the vehicle and begin uns…
How to Replace the Oil Pump on a Peugeot 307?
How to Replace the Oil Pump on a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) To replace the oil pump on a Peugeot 307, lift the car using a jack or ramp to access the components in the lower part of the engine bay. You will fi…
How to replace the cabin air filter of the Peugeot 307
How to replace the cabin air filter of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In the following guide addressed to those of you who own a Peugeot 307, we will help you complete the replacement of the cabin air filter quickly and…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos