Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removal and Replacement of Cylinder Head

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cylinder head

Video tutorial

This video shows how to remove and replace the cylinder head on your car. If your car is experiencing abnormal coolant consumption, one of the main causes could be damage to the head gasket. If the car has been stationary for a long time, the gasket may deteriorate, or if the engine has overheated, the gasket may fail.

To replace the gasket, you need to remove the cylinder head and all associated parts; finally, take the head to be machined and before reassembling, install a new gasket specific to the engine. Remember to tighten the head with the correct torque.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to Replace the Cylinder Head Gasket on a Peugeot 307 1.4 Petrol?
How to Replace the Cylinder Head Gasket on a Peugeot 307 1.4 Petrol?
Peugeot 307 (2001-2009 / MK 1) To remove the cylinder head gasket from the Peugeot 307 1.4 petrol, first remove the engine cover and position the timing pins as shown in the video:…
How to Replace the Cylinder Head Gasket on a Peugeot 307
How to Replace the Cylinder Head Gasket on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video tutorial, you can see how to replace the cylinder head gasket on a Peugeot 307 1.4 petrol. Before changing the belt, insert the timing …
How to Change the Spark Plugs on a Peugeot 307
How to Change the Spark Plugs on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To replace the spark plugs on a Peugeot 307, pull the lever to open the engine compartment and lift the front bonnet, securing it in place. Remove th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos