Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on the Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Engine oil

Video tutorial

This brief and simple guide outlines the main steps to change the engine oil and oil filter on the Peugeot 307. First, lift the vehicle and begin unscrewing the engine oil drain bolt located on the sump, allowing it to drain into a container for about ten minutes.

Then, open the bonnet and use a 27 mm socket with an extension to unscrew and remove the oil filter cover, as shown in the video.

At this point, extract and replace the cartridge with the new one, and finally pour in the new oil!


Updated on 8 May 2026 by ScegliAuto


Related tutorials

How to Replace the Reverse Light Bulb on a Peugeot 307
How to Replace the Reverse Light Bulb on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Below is the procedure necessary to independently replace the reverse light bulb on your Peugeot 307. First, ensure you have a new reverse bulb that …
How to Replace the Oil Pressure Sensor on the Peugeot 307 1.4
How to Replace the Oil Pressure Sensor on the Peugeot 307 1.4
Peugeot 307 (2001-2009 / MK 1) In today's video tutorial, you will learn how to remove and replace the engine oil pressure sensor on the Peugeot 307 with a 1.4 engine. First, open …
Where is the fuse box located in the Peugeot 307
Where is the fuse box located in the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To find the fuse box in your Peugeot 307, follow the steps outlined in this guide. First, open the glove compartment on the passenger side and locate…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos