Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Thermostat on the Peugeot 307?

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Thermostat

Video tutorial

To replace the thermostat on the Peugeot 307, open the bonnet to access the components in the engine bay. On the right side, locate the air filter box, which must be removed by loosening the screws that secure it. Once removed, you will find the underlying hose for the coolant.

Disconnect this hose to access the thermostat, which should be freed from its housing and replaced with a new spare part.


Updated on 11 September 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port on the Peugeot 307
Where to Find the OBD Port on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this new guide, you will learn how to easily and safely locate the OBD port in your Peugeot 307. First, enter the vehicle from the driver's side a…
How to Replace the MAP Sensor on a Peugeot 307?
How to Replace the MAP Sensor on a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) To replace the MAP sensor on a Peugeot 307, open the bonnet to access the components in the engine bay. At the rear of the engine block, just above t…
How to Replace the Alternator on a Peugeot 307?
How to Replace the Alternator on a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) To replace the alternator on a Peugeot 307, open the bonnet to access the components located inside the engine bay: on the left side, at the bottom, …

Other guides you may be interested in

    Frequently Asked Questions

    • 307 2001-2009 - Where is the thermostat of a Peugeot 307 located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos