Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Alternator on a Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Alternator

To replace the alternator on a Peugeot 307, open the bonnet to access the components located inside the engine bay: on the left side, at the bottom, you will find the alternator. It can be removed from its housing by unscrewing the securing bolts and disconnecting the power cables. Once the device is freed, you can extract it from its location, allowing for replacement with a new spare part; after the replacement, connect and install the device, ensuring everything functions correctly.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the alternator of the Peugeot 307 1.6
How to replace the alternator of the Peugeot 307 1.6
Peugeot 307 (2001-2009 / MK 1) Today's procedure will show us how to disassemble and replace the alternator of the Peugeot 307 1.6, following the instructions below. First, we open…
How to Replace the Alternator on a Peugeot 307?
How to Replace the Alternator on a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) Replacing the alternator on a Peugeot 307, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not i…
Where are the fuses located in the Peugeot 307?
Where are the fuses located in the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) Inside the Peugeot 307, all the fuses are contained within two fuse boxes installed inside the vehicle: the first of these is located inside the cabi…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos