Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pedal Switch on Peugeot 407

Model: Peugeot 407 MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Push button

Video tutorial

Replace the damaged brake button on a Peugeot 407. Open the door and enter the vehicle. Remove the cover under the steering wheel using a plastic trim tool.

If the removal of the damaged button is difficult, use pliers. Once this is done, insert the new button into its designated slot.

Close the inspection box with the plastic cover. Test the proper functioning of the vehicle by turning on the dashboard with the appropriate key. Check the operation of the button.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Pedal Switch on a Peugeot 407?
How to Replace the Brake Pedal Switch on a Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) To replace the brake pedal switch, remove the cover panel located just above the pedals and below the steering column. This will allow access to the …
How to replace the brake light switch in the Peugeot 407?
How to replace the brake light switch in the Peugeot 407?
Peugeot 407 (2004-2012 / MK 1) In this tutorial, you will see how to replace the brake light switch in the Peugeot 407, a very simple and quick operation. First, ensure that the ke…
Replacing the cabin air filter in the Peugeot 407
Replacing the cabin air filter in the Peugeot 407
Peugeot 407 (2004-2012 / MK 1) To ensure that the air conditioning system in the Peugeot 407 always distributes clean air in the cabin, replace the dedicated filter at the interval…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos