Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Coolant on Peugeot RCZ

Model: Peugeot Rcz MK 1 - Years 2010-2015
Part: Antifreeze coolant

How to replace the coolant on an RCZ? Here's how to do it. Disconnect/open the radiator hose at the bottom using a socket, and let the fluid drain into a container. Flush the cooling system with the appropriate fluid: carry out this procedure until the pipes and radiator are completely clean. Screw in the securing bolts under the radiator. Top up the expansion tank with new coolant. Start the engine and carry out a test of the cooling circuit.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the Peugeot RCZ car radio
How to disassemble the Peugeot RCZ car radio
Peugeot Rcz (2010-2015 / MK 1) In this new guide, we will explain to you the various steps you need to follow if you intend to remove the factory radio from your Peugeot RCZ by you…
Where is the OBD port of the Peugeot RCZ located?
Where is the OBD port of the Peugeot RCZ located?
Peugeot Rcz (2010-2015 / MK 1) To be able to independently locate the OBD port inside your Peugeot RCZ, it only takes a few seconds. All you have to do is carefully read the follow…
How to reset the service indicator on the Peugeot RCZ 2012
How to reset the service indicator on the Peugeot RCZ 2012
Peugeot Rcz (2010-2015 / MK 1) If you own a 2012 Peugeot RCZ and are curious to discover how to correctly and quickly perform a manual reset of the service light, then all you have…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos