Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : Peugeot 2008, 208 diesel filter replacement

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Diesel filter
Operation: Peugeot 2008, 208 diesel filter replacement

In this video tutorial we will see how to remove and replace the diesel filter in the Peugeot 2008 and 208 models. First we go to lift the car and we go to identify the diesel filter: then to remove it we go to remove the diesel pipe, helping ourselves with a screwdriver, as shown in the video: after which we also release the tab of the other tube and go to extract it in the same way. At this point we drain all the excess diesel and we go to pull the filter by extracting it from the support bracket: then let's replace it with the original spare part of the new house!


Posted on 20 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - Where is the fuel filter located on a Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - How to replace the fuel filter of the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the diesel filter located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Where is the diesel filter of the Peugeot 2008 1.5 diesel? Read Answer
    • Peugeot 2008 2013-2019 - How much does the Peugeot 2008 diesel filter cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos