Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 2008
    4. : How do you replace the diesel filter of the Peugeot 2008?

Peugeot 2008 - Video tutorial

Model: Peugeot 2008 MK 1 - Years 2013-2019
Part: Diesel filter
Operation: How do you replace the diesel filter of the Peugeot 2008?

In order to replace the Peugeot 2008 diesel filter, you need to open the hood, so that you can access the components inside the engine compartment. The filter will be located in the central area immediately under the windshield: this must be freed from all pipes and connectors connected to it. When these have been disconnected, the circular cover of the upper part of the filter can be unscrewed, so that the filter itself can be extracted from the inside. At this point it will be possible to insert the new filter, connecting it to the appropriate connectors and pipes.


Posted on 8 May 2024 by ScegliAuto

    Frequently Asked Questions

    • Peugeot 2008 2019-2026 - Where is the fuel filter located on a Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - How to replace the fuel filter of the Peugeot 2008? Read Answer
    • Peugeot 2008 2013-2019 - Where is the diesel filter located in the Peugeot 2008? Read Answer
    • Peugeot 2008 2019-2026 - Where is the diesel filter of the Peugeot 2008 1.5 diesel? Read Answer
    • Peugeot 2008 2013-2019 - How much does the Peugeot 2008 diesel filter cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos