Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Third Brake Light Bulb on Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part:

Video tutorial

Before carrying out any maintenance on a car, ensure the vehicle is on a flat surface or on a ramp for safe and stable working conditions. After taking this precaution, proceed to replace the third brake light bulb on the Peugeot 307. Open the rear boot and remove the protective trim from the inside of the boot, corresponding to the position of the third brake light.

Simply pull it off using your fingers. At this point, you will see the back of the third brake light assembly.

Insert a screwdriver into the two side holes to remove the assembly. Now, disconnect the two power cables and you can proceed to replace either the entire assembly or just the bulb.

To replace the bulb, rotate the plastic screw counterclockwise that holds the bulb in place. Remove the bulb and replace it. Now, reassemble everything by reversing the steps taken.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to change the bulb of a rear headlight of a Peugeot 307
How to change the bulb of a rear headlight of a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) The first step to replace the bulb of a rear headlight of a Peugeot 307 car is to open the trunk of the vehicle and lift the internal side panel on t…
Replacing the Number Plate Light on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this brief video tutorial, you will learn how to remove and replace the number plate bulb on a Peugeot 307, following the instructions below. Firs…
How to replace the license plate light bulb of the Peugeot 307
How to replace the license plate light bulb of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Here's how to replace the license plate light bulb on the Peugeot 307: you don't need to remove the entire plate, just push it out of its housing to …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos