Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Repairing the Rev Counter/Instrument Cluster on a Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Instrument cluster

Today, you will learn how to repair the rev counter or instrument cluster on a Peugeot 206 by following these main instructions. After removing the instrument cluster from the vehicle by unscrewing all the fixing screws and disconnecting the electrical connector, open the instrument cluster by prying on the tabs at the back; once the front cover is removed, take out the needles and the rev counter and speedometer dials. At this point, carry out the repair on the faulty component (in this case, the mechanical motor of the rev counter) and then reassemble everything, as shown in the video!

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the instrument panel on the Peugeot 206?
How to replace the instrument panel on the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) You can replace the instrument panel on the Peugeot 206 by using a tool like a screwdriver to pry off the trim panel around the instrument cluster. O…
How to Activate the Fog Lights of a Peugeot 206
How to Activate the Fog Lights of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, sit in the driver's seat of your Peugeot 206. Insert the key into the ignition switch to activate the instrument panel. Next, turn t…
How to Remove the Door Panel on Peugeot 206
How to Remove the Door Panel on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the damaged door panel on a Peugeot 206 (right side). Disconnect the battery terminals located in the engine bay. Remove the plastic next to t…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos