Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 206
    4. : Replacement of air conditioning knobs lights on Peugeot 206

Peugeot 206 - Video tutorial

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Dashboard light
Operation: Replacement of air conditioning knobs lights on Peugeot 206

First of all, remove the upper plastic that frames the digital clock: to do this you will have to push this plastic from underneath, leveraging, so that the upper joints are released. Unscrew the two torx screws now uncovered and remove the dashboard having the car radio with it, still being careful not to break the clips. At this point you can access the four screws that fix the small plastic inherent to the air conditioner controls: unscrew them and remove the plastic by levering with a small screwdriver. Removed this dashboard you can finally detach the bulbs and replace them.


Posted on 4 January 2024 by ScegliAuto



Replacement of the cabin air filter of the Peugeot 206.
Peugeot 206 (1998-2012 / MK 1) To prevent dirt and dust from entering the air conditioning system of the Peugeot 206, a special filter is provided on the intake, which needs to be
Peugeot 206 2.0 fuse diagram
Peugeot 206 (1998-2012 / MK 1) In this video we will show you where the Peugeot 206 2.0 fuse box is located and its diagram. By opening the engine hood you will find the fuse box o
How to activate the fog lights of a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Before starting, we will have to sit on the driver's seat of our Peugeot 206. Let's start by inserting the key in the ignition, and then activate the

Other guides that may interest you

How do you reset the tire pressure warning light on Hyundai I10?

In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly.

Watch the video!


by ScegliAuto

More videos