Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Climate Control Switches of the Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: A/C controls

Below are the steps to remove and replace the climate control switches or their internal bulbs in the Peugeot 206. First, get inside the vehicle and start by removing the plastic cover of the central instrument panel, using something thin and pointed to lever it off; then remove the climate control switches from the dashboard, disconnecting the electrical connectors found on the back, as shown in the video. At this point, if necessary, replace any faulty bulbs with new ones, applying the reverse procedure for reassembly!

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Climate Control Bulbs on a Peugeot 206
How to Replace the Climate Control Bulbs on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Today, we will see the instructions that will allow you to disassemble and replace the bulbs in the climate control switches of the Peugeot 206. Firs…
Replacing Climate Control Knob Lights on Peugeot 206
Replacing Climate Control Knob Lights on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) First, remove the upper plastic trim that surrounds the digital clock: to do this, push the plastic from underneath, using leverage to disengage the …
Removing the Climate Control Buttons on Peugeot 206
Removing the Climate Control Buttons on Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Remove the upper cover of the central dashboard and undo the two screws underneath. This will free the mask of the central dashboard, allowing you to…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos