Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuel Filter Replacement on Peugeot 206

Model: Peugeot 206 MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Diesel fuel filter

Video tutorial

Open the fuel tank cover and unscrew the cap underneath. Lift the car with a jack, although it is better to use a ramp for this operation.

Disconnect the fuel lines from the bottom of the body and detach them from the fuel filter compartment (be careful as fuel will spill out). Using a pry bar, remove the filter. Fit the new part in the correct position relative to the fuel flow.

Reconnect the fuel lines you previously disconnected, both those going to the filter and those to be secured to the body.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Filter of the Peugeot 206?
How to Replace the Fuel Filter of the Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) To replace the fuel filter of the Peugeot 206, access the underside of the vehicle near the left rear wheel: here you will find the fuel filter close…
How to Remove the Fuel Filter on a Peugeot 206
How to Remove the Fuel Filter on a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Let’s see how to remove the fuel filter on a Peugeot 206: lift the car using a column jack and locate the fuel filter (as shown in the video). Using …
How to Replace the Fuel Filter on a Peugeot 206?
How to Replace the Fuel Filter on a Peugeot 206?
Peugeot 206 (1998-2012 / MK 1) In this tutorial, you will learn how to replace the fuel filter on a Peugeot 206, a very simple and quick operation. First, lift the right rear side …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos