Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Bulbs on a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Headlight bulb

The smallest bulb closest to the centre of the car is the position light, the one next to it is the dipped beam, while the bulb in the centre of the headlamp is the main beam, and the side bulb is the indicator. Lift the bonnet and insert the support rod. Remove the round cover located behind the headlamp, disconnect the connector, and unclip the metal clip holding the bulb in place. Pull out the bulb and replace it. If you need to replace the indicator bulb, it has its own small cover located further to the side.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight of the Peugeot 307
Replacement of the front headlight of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) The steps outlined in this guide will show us how to disassemble and replace the front headlight of the Peugeot 307, following the instructions below…
How to replace the bulb of the multifunction display of the Peugeot 307
How to replace the bulb of the multifunction display of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Replacing the bulb of the multifunction display on the Peugeot 307 is necessary when the display lights up but you cannot read what is written on it.…
How to Replace the Rear Headlamp Bulbs on a Peugeot 307
How to Replace the Rear Headlamp Bulbs on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) How to replace the rear headlamp bulbs on a Peugeot 307? This is a very simple operation. Open the boot lid, then remove the fabric cover located on …

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos