Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing On-Board Computer on Peugeot 208

Model: Peugeot 208 UP, UW, UB, UJ, MK 2 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Onboard computer

See other generations:
Video tutorial

Detach the on-board computer frame by prying it with a small flathead screwdriver or a plastic wedge and disconnect its connector. Unscrew the two T20 Torx screws that secure the display from above, then with a flathead screwdriver, press the two clips located near the previous Torx screws and pull out the display.

While doing this, insert the same screwdriver into the lower gap of the on-board computer. Once it is out of its housing, disconnect the connector and you're done.

As you can see, this is a very simple operation that can be done at home.


Updated on 4 April 2026 by ScegliAuto


Related tutorials

How to Set the Clock on the Peugeot 208
How to Set the Clock on the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Let’s discover in this short and simple guide how to set the clock on the Peugeot 208, as well as the 2008 and 308 models. First, turn on the ignitio…
How to set the language of the onboard computer of the Peugeot 208
How to set the language of the onboard computer of the Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Today we will see how to change the language of the onboard computer on a Peugeot 208 vehicle. To set a different language, we must press the setting…
How to Turn Off the Screen on a Peugeot 208
How to Turn Off the Screen on a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) Today, you will learn how to turn off the onboard computer screen on a Peugeot 208 to save the vehicle's battery. To perform this operation, press th…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos