Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Third Brake Light on Peugeot 307-308

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Light bulb

In today's tutorial, you will learn how to remove the third brake light from a Peugeot 307, which is similar for other models like the 308. First, open the boot and remove the upper plastic cover using a sharp tool. Next, insert a small screwdriver into the holes to release and remove the third brake light from the outside. At this point, disconnect the electrical connector for the bulbs and remove the bulb holder to replace any faulty bulb. Finally, reassemble everything!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Dismantling the Third Brake Light on a Peugeot 307
Dismantling the Third Brake Light on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In today's video, you will learn how to dismantle the third brake light on a Peugeot 307, in simple steps. First, open the boot lid and use a 10 mm s…
How to Replace the Third Brake Light on a Peugeot 307
How to Replace the Third Brake Light on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Before starting, open the rear hatch of the boot on your Peugeot 307. Begin by unclipping and removing the internal cover near the third brake light.…
How to Remove the Third Brake Light on Peugeot 307
How to Remove the Third Brake Light on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Damage to the bulbs of the third brake light is a common issue. To replace these bulbs, you first need to remove the third brake light. Open the rear…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos