Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Third Brake Light from a Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light

Video tutorial

Remove the plastic cover using a screwdriver (inside the boot), and unscrew the screws located inside. Once the light is free from any constraints, disconnect it from the spoiler (unplug the relevant power connectors).

Finally, refit the new light: connect the power connector, insert the light into the spoiler of the boot (after fitting the bulbs), and screw in the securing pins. Test the lights for correct operation after installation.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

Replacing the Rear Headlamp Bulb on a Peugeot 307
Replacing the Rear Headlamp Bulb on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Replacing the rear headlamp bulb on a Peugeot 307 is a very simple operation. Open the boot lid, then remove the fabric cover located on the side tri…
How to Replace the Rear Headlamp Bulbs on a Peugeot 307
How to Replace the Rear Headlamp Bulbs on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) How to replace the rear headlamp bulbs on a Peugeot 307? This is a very simple operation. Open the boot lid, then remove the fabric cover located on …
Removing Rear Light Assembly in Peugeot 307
Removing Rear Light Assembly in Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this video, you will see how to remove the rear light assembly and replace the burnt-out bulb in a Peugeot 307. First, open the boot lid and remov…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos