Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : Remove the Peugeot 308 ceiling light

Peugeot 308 - Video tutorial

Model: Peugeot 308 MK 1, T7 - Years 2007-2014
Part: Interior lights ceiling light bulb
Operation: Remove the Peugeot 308 ceiling light

How to remove the Peugeot 308 ceiling light and replace the bulbs inside it? Let's see the disassembly of the pieces. We pry with a screwdriver between the ceiling light and the roof panel (without breaking the plastic), take the ceiling light out of the panel and disconnect the power supply terminal. We open the ceiling light: we detach the slide from the ceiling light. We replace the damaged bulb with a new one (same size and voltage). We mount the ceiling light in its housing (we push the transparent plastic with our hands until the tabs in the lateral plastic are completely locked). We test the correct functioning of the lights at the end of assembly.


Posted on 19 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 308 2007-2014 - Why is the service light not working in the Peugeot 308? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos