Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Removing the bumper and headlight on Peugeot 307

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Headlight
Operation: Removing the bumper and headlight on Peugeot 307

With a small flat screwdriver remove the round clips that secure the bumper at the top. Remove the wheel arches and unscrew the side bolts of the same bumper, then unscrew the lower bolts and extract it from its seat. Now let's move on to the disassembly of the headlight concerned: this is fixed by two upper and one lower bolts, which you will obviously have to unscrew. Disconnect the connectors from the bulbs and take out the headlight. To reassemble the light, obviously proceed backwards, inserting it in its seat and screwing in the various bolts, before connecting the connectors. Finally mount the bumper.


Posted on 23 January 2024 by ScegliAuto

    Frequently Asked Questions

    • 307 2001-2009 - How to remove the headlights on Peugeot 307? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos