Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of a Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Door trim panel

Video tutorial

Before you start, open the door of your Peugeot 307. Begin by prying off and removing the door panel inserts using a thin but sturdy tool. Next, remove the internal door handle by unscrewing the fixing screw, then pull the handle out of its housing and disconnect the cable.

After that, unscrew and remove all the screws securing the door panel. At this point, pry off and remove the door panel from its housing, then disconnect the electrical connectors, and the removal will be complete.


Updated on 11 April 2026 by ScegliAuto


Related tutorials

How to remove the rear window of the Peugeot 307 door
How to remove the rear window of the Peugeot 307 door
Peugeot 307 (2001-2009 / MK 1) Here are the main steps that will allow you to remove and replace the side glass of the rear door, along with the door panel, of the Peugeot 307. Fir…
How to Remove the Door Panel on a Peugeot 307
How to Remove the Door Panel on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) To remove the door panel on a Peugeot 307, loosen the screws that secure it to the corresponding door: first, unscrew the one next to the window swit…
How to Remove the Right Door Panel on Peugeot 307
How to Remove the Right Door Panel on Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Remove the right rear door panel on Peugeot 307: use a screwdriver to unscrew the screws located in the space of the upper door opening lever and the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos