Do it yourself
| ||||
|
Peugeot 208 - Video tutorial
Model: Peugeot 208
A9, MK 1
- Years 2012-2019 Before we can start, we will have to go to open the front door of our Peugeot 208. Let's start then by going to disengage and remove the internal cover positioned near the rear-view mirror. After that, we will have to disassemble and remove the door panel, unscrewing the fixing screws and disconnecting the electrical connectors. By doing so, we will have reached the nuts that secure the mirror to the door. We then proceed by disconnecting the electrical connector of the mirror, and then unscrewing and removing the fixing nuts. At this point, we will be able to extract and remove the external rearview mirror, and we will have finished the disassembly.
Posted on 30 January 2024 by ScegliAuto
How to replace the exterior mirror on the Peugeot 208
Peugeot 208 (2012-2019 / A9, MK 1) To carry out this simple operation you will have to remove the plastic part that is at the base of the part of the window corresponding to the rearvi
How to replace the rear view mirror cap on the Peugeot 208?
Peugeot 208 (2012-2019 / A9, MK 1) In order to replace the exterior rear-view mirror cap of the Peugeot 208 you need to detach the mirror glass, removing it from the inside of its hous
Removing the exterior mirror on Peugeot 208
Peugeot 208 (2019-2024 / UJ, UB, UW, UP, MK 2) To extract the mirror glass, the procedure is very simple: in fact, you just need to lever with your fingers (or using a plastic wedge in case you fi Other guides that may interest you
|
Frequently Asked QuestionsHow do you reset the tire pressure warning light on Hyundai I10?In order to reset the tire pressure warning light on the Hyundai I10 there is no procedure that can be carried out independently. First of all, the flat tires must be returned to the correct inflation pressure, indicated on the sticker stuck in the driver's door pillar. Once the tire in question has been inflated, a diagnostic tool can be connected to the vehicle's OBD port so that the error can be reset. By following the procedure indicated in the tutorial, it will be possible to reset the warning light and turn on the ignition to check that everything has been done correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.068
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |