Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 3008
    4. : Peugeot 3008 low beam replacement

Peugeot 3008 - Video tutorial

Model: Peugeot 3008 MK 1, T84 - Years 2009-2016
Part: Headlight
Operation: Peugeot 3008 low beam replacement

Stop the engine, disconnect the battery and open the hood by placing the support rod. Remove the lower protective plastic of the light, which is visible with the high bonnet and which can be pulled by hand. Now remove the connector e. VoilÃ! Here is the light bulb. As shown in the video, detach it and insert the new one by fitting the hooks in place. At this point, put the connector with the bulb back in place, making sure it is well positioned, then replace the cover. Close the hood, connect the battery and start the car to verify that the new bulb is working.


Posted on 16 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos