Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio on Peugeot 206

Model: Peugeot 206 MK 1 - Years 1998-2012
Part: Car stereo

To remove the radio on a Peugeot 206, as with many other car models (Peugeot and others), you need to obtain the specific double keys shown in the video. The procedure is really simple: insert the keys into the four holes at the corners of the radio until fully inserted to release the internal clips, then pull out the radio using the keys. Done! The only caution to remember is to disconnect the cables while removing the radio. If you have a fascia with the new radio, connect the cables to the fascia before connecting them. Insert the radio, and you're done.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from the Peugeot 206
How to Remove the Radio from the Peugeot 206
Peugeot 206 (1998-2012 / MK 1) If you want to remove the standard radio from your Peugeot 206 but don't know how, follow these steps carefully. First, enter the vehicle and ensure …
Replacing the Radio in a Peugeot 206
Replacing the Radio in a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) See how to change the radio in your Peugeot 206. With the car off, insert the appropriate removal pins into the holes on the sides of the front panel…
How to Replace the Car Radio in a Peugeot 206
How to Replace the Car Radio in a Peugeot 206
Peugeot 206 (1998-2012 / MK 1) Insert the metal keys into the four holes found in the original car radio. Pull firmly towards you to extract the device. Disconnect the power cable …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos